Lucky
12-26-2002, 08:00 AM
LEVEL JUMPING I had a lot of problems with this at 1st but I got it now. I want to help people that had as much problems with
it as I did. If you want to jump from the 1st Level to the 2nd and back again the 1st thing you do is bring up the "Set Trigger
Type" Window (page105 of the manual) Then you want to "Select What to Trigger" you would select Finish. Ok in the box to the right of Finish you put a 2
because you want to jump to the 2nd Level. In the TIMER you want a 1 because it is the 1st time you will be jumping. Now you want to
place a start position In the next block of the finish Trigger to get back from the 2nd Level. You now have to press the O to bring up the OBJECT CODE BITS In the box place a 1 press
enter and then ok. You do not need to trigger it to anything for it to work that is for the start position only. Now to get
back from the 2nd Level bring up the "Set Trigger Type" Window select Finish and put a 1 in the box because you are jumping
from Level 2 to Level 1. In the TIMER you put a 1 because it is the 1st jump from Level 2 to Level 1. Now you need to pull up the( OCB) again and In the start position put a 1
in the box hit enter and ok because it is the 1st starting point in level 2. You also need to make sure that Lara is in both Levels for it to work. You want to make sure that the Lara you use has the same animations for it to work right.
First Level FINISH ( 2 ) TIMER ( 1 )
Second Level FINISH ( 1 ) TIMER ( 1 ) LARA-START ( 1 )
Now lets say you understand a little better about jumping here is a chart if you want five Levels in your game.
First Level FINISH ( 2 ) TIMER ( 1 )
Second Level FINISH ( 3 ) TIMER ( 1 ) LARA-START ( 1 )
Third Level FINISH ( 4 ) TIMER ( 1 ) LARA-START ( 1 )
Fourth Level FINISH ( 5 ) TIMER ( 1 ) LARA-START ( 1 )
Fifth Level LARA-START ( 1 )
If you want to jump from whatever Level you are in to whatever Level you want to jump to you just make sure that the TIMER reads the number of times you have jumped to that particular
Level. The start would be the same way If it is the second jump to that Level then you would use a 2.
Also Raider X wanted me to tell about jumping with a vehicle If you want to jump with the jeep, motorbike or whatever you just put the vehicle in a room by itself in the Level you want to jump to and Lara will be on or in the vehicle when she jumps. You can also change Levels with the torch in your hand. If you have any problems or questions don’t hesitate to send me a personal message I will try to explain It the best I can. Good luck and have fun making Levels. If you want a more detailed tutorial try Tomb Raider Goodies (http://www.leveleditor.com/)
it as I did. If you want to jump from the 1st Level to the 2nd and back again the 1st thing you do is bring up the "Set Trigger
Type" Window (page105 of the manual) Then you want to "Select What to Trigger" you would select Finish. Ok in the box to the right of Finish you put a 2
because you want to jump to the 2nd Level. In the TIMER you want a 1 because it is the 1st time you will be jumping. Now you want to
place a start position In the next block of the finish Trigger to get back from the 2nd Level. You now have to press the O to bring up the OBJECT CODE BITS In the box place a 1 press
enter and then ok. You do not need to trigger it to anything for it to work that is for the start position only. Now to get
back from the 2nd Level bring up the "Set Trigger Type" Window select Finish and put a 1 in the box because you are jumping
from Level 2 to Level 1. In the TIMER you put a 1 because it is the 1st jump from Level 2 to Level 1. Now you need to pull up the( OCB) again and In the start position put a 1
in the box hit enter and ok because it is the 1st starting point in level 2. You also need to make sure that Lara is in both Levels for it to work. You want to make sure that the Lara you use has the same animations for it to work right.
First Level FINISH ( 2 ) TIMER ( 1 )
Second Level FINISH ( 1 ) TIMER ( 1 ) LARA-START ( 1 )
Now lets say you understand a little better about jumping here is a chart if you want five Levels in your game.
First Level FINISH ( 2 ) TIMER ( 1 )
Second Level FINISH ( 3 ) TIMER ( 1 ) LARA-START ( 1 )
Third Level FINISH ( 4 ) TIMER ( 1 ) LARA-START ( 1 )
Fourth Level FINISH ( 5 ) TIMER ( 1 ) LARA-START ( 1 )
Fifth Level LARA-START ( 1 )
If you want to jump from whatever Level you are in to whatever Level you want to jump to you just make sure that the TIMER reads the number of times you have jumped to that particular
Level. The start would be the same way If it is the second jump to that Level then you would use a 2.
Also Raider X wanted me to tell about jumping with a vehicle If you want to jump with the jeep, motorbike or whatever you just put the vehicle in a room by itself in the Level you want to jump to and Lara will be on or in the vehicle when she jumps. You can also change Levels with the torch in your hand. If you have any problems or questions don’t hesitate to send me a personal message I will try to explain It the best I can. Good luck and have fun making Levels. If you want a more detailed tutorial try Tomb Raider Goodies (http://www.leveleditor.com/)